YouTube
Rewards
My Account
Islander Automatic Dive Watch with Solid-Link Bracelet, AR Sapphire Crystal, and Luminous Sapphire Bezel Insert #ISL-10
Island Watch would like to introduce you to the new Islander dive watch. You will immediately notice that is has a very familiar 43mm case with an offset screw-down crown at 4:00. Thickness is 14mm and tip to tip it is a very wearable 46mm (i.e. looks big, but doesn't wear big on your wrist). Note that the lug ends are drilled for easier bracelet to strap changes. The case back has a rendering of Long Island on it along with the Islander name, Island Watch and 200 meter water resistance.
Inside the case is an NH36, 24-jewel automatic movement with 21,600 vibrations per hour. This self-winding movement supports hand winding and hacks (seconds hand stops when you pull out the crown). Power reserve is about 41 hours fully wound. The NH36 also has both a day and date wheel viewed at 3:00 on the dial.
The white dial has SuperLuminova on the hands and hour makers and the Island Watch logo is under 12:00. The 120-click uni-directional bezel has a scratch-resistant blue (diver marked) sapphire insert that is also treated with SuperLuminova for a maximum glow-in-the-dark experience when lights go out. It is quite bright and long lasting.
The dial has enhanced visibility due to the use of an anti-reflective flat sapphire crystal that also guards against scratches. The anti-reflective coating is on the underside of the sapphire and it imparts a slight bluish hue at some viewing angles.
And, lastly you get a beefy bracelet with solid links, solid end links and a dual push-button flip lock deployant clasp with three position micro-adjustment. For sizing the bracelet, you will find screws are used for removing bracelet links instead of pins.
NOTE: The Islander dive and dual-time watch is compatible with aftermarket parts available at Island Watch (and elsewhere) for the SKX007 models, such as crystals, bezels, inserts, chapter rings, dials, hands, bracelets, etc.
To see all the bracelets that are compatible with this Islander watch click here.
- Movement:NH36 Automatic (self-winding, hand wind, hacks)
- Case:Stainless steel, 43mm x 14mm thick. 46mm tip to tip
- Back:Engraved screw-in back
- Crystal:Anti-reflective (blue hue) flat sapphire
- Band:Bracelet with all solid links, Push-Button Deployant Clasp, 22mm.
- Water Resistant:200 meters
- Warranty:1 Year
- Discontinued:Yes
- SII NH36 Movement with day and date
- 43mm x 14mm x 46mm
- Solid screw back, etched
- Flat sapphire, blue AR underside
- Bracelet with solid end links, solid links, screw-type size adjustment
- Flip-lock deployant with 3 position micro adjust
- Water Resistant to 200 Meters
- Unidirectional 120 click bezel
- Superluminova C3 Luminous sapphire insert
- Drilled end lugs
- C3 superluminova
- 1 yr warranty