Islander 38mm Automatic Dive Watch with Solid-Link Bracelet, AR Sapphire Crystal, and Luminous Sapphire Bezel Insert #ISL-24
Island Watch would like to introduce you to the new Islander dive watch. You will immediately notice that is has a very familiar 38mm case with an offset screw-down crown at 4:00. Thickness is 13mm and tip to tip it is a very wearable 44.5mm. Note that the lug ends are drilled for easier bracelet to strap changes. The case back has a rendering of Long Island on it along with the Islander name, Island Watch and 200 meter water resistance.
Inside the case is an NH36, 24-jewel automatic movement with 21,600 vibrations per hour. This self-winding movement supports hand winding and hacks (seconds hand stops when you pull out the crown). Power reserve is about 41 hours fully wound. The NH36 also has both a day and date wheel viewed at 3:00 on the dial.
The blue dial has SuperLuminova on the hands and hour makers and the Island Watch logo is luminous under 12:00. The 120-click uni-directional bezel has a scratch-resistant blue-grey sapphire insert that is also treated with SuperLuminova for a maximum glow-in-the-dark experience when lights go out.
The dial has enhanced visibility due to the use of an anti-reflective flat sapphire crystal that also guards against scratches. The anti-reflective coating is on the underside of the sapphire and it imparts a bluish hue at some viewing angles.
Upgraded: The bracelet has solid links, and solid end links. Screws are now used for adjustments (instead of pins) for sizing the bracelet. It now also features a robust milled scissor push-button deployant clasp with three position micro-adjustment. Also, The crown is now signed with the Island Watch logo.
NOTE: The Islander dive and dual-time watch is compatible with aftermarket parts available at Island Watch (and elsewhere) for the SKX013 models, such as crystals, bezels, inserts, chapter rings, dials, hands, bracelets, etc.
To see all the bracelets that are compatible with this Islander watch click here.
- Movement:NH36 Automatic (self-winding, hand wind, hacks)
- Case:Stainless steel, 38mm x 13mm thick. 44.5mm tip to tip
- Back:Engraved screw-in back
- Crystal:Anti-reflective (blue hue) flat sapphire
- Band:Bracelet with all solid links, Milled Scissor Deployant Clasp, 20mm.
- Water Resistant:200 meters
- Warranty:1 Year
- Discontinued:Yes
- SII NH36 Movement with day and date
- 38mm x 13mm x 44.5mm
- Solid screw back, etched
- Flat sapphire, blue AR underside
- Bracelet with solid end links, solid links, screws for size adjustment
- Milled scissor deployant clasp with 3 position micro adjust
- Water Resistant to 200 Meters
- Unidirectional 120 click bezel
- Superluminova C3 Luminous sapphire bezel insert
- Drilled end lugs
- C3 superluminova
- 1 yr warranty